The transfer car is traveling on rails, which is installed in the ground. It is feed power to the gear motor thru cable, then the car is moving forward or backward accordingly. The transfer car is used to transfer material such as mold from one location to another within factory. The carrying ability is up to 300MT. It is also suitable for coal and mine, steel plant, shipbuilding, or at dock, etc.
Large load 90 degree turning electric rail turnplate
Large Load 90 degree turning electric rail turnplate
The transfer car is used to transfer material such as mold from one location to another within factory. The carrying ability is up to 300MT. It is also suitable for coal and mine, steel plant, shipbuilding, or at dock, etc.
| Model | BZP-2t | BZP-16t | BZP-25t | BZP-40t | BZP-63t |
|---|---|---|---|---|---|
| Rated Load(t) | 2 | 10 | 25 | 45 | 63 |
| Diameter(mm) | 1200 | 2000 | 2500 | 2800 | 3000 |
| Rail Inner Gauge (mm) | 1200 | 1435 | 1435 | 1435 | 1435 |
| Rotating speed | 0.8rmp | 0.8rmp | 0.8rmp | 0.8rmp | 0.8rmp |
| Motor Power | 0.8 | 2.2 | 3 | 5.5 | 7.5 |
| Reference Weight(t) | 2.8 | 4.2 | 6.5 | 7 | 10.8 |
| Recommended Rail Model | P15 | P24 | P38 | P44 | P50 |
As to the surface, flat decking, V-shaped coil holder, U-shaped decking is available; Conditions: running on straight rails, ‘S’ or curved track, and cement floor; Power source: cable reel, battery, dragging cable, festoon cable, low-voltage rails, shrouded bus bar etc.